Simon Tại sao, quản lý của bộ phận bán hàng quốc tế dep. nói về máy Bơm chìm và các điểm nổi bật của loạt TPRK_E
Simon Tại sao và Charles Wu chứng minh việc thay thế phốt trục trên Sê-ri TPRK_E dễ dàng như thế nào
Simon Yen nói về động cơ hiệu suất cao được chứng nhận CE và RoHs do Walrus phát triển
Một so sánh sâu về các mô hình Bơm chìm khác nhau của Mark Lin, phó giám đốc bộ phận bán hàng quốc tế
Mark Lin trưng bày thiết kế bể xả nước độc đáo TPRK_E Series.
Mark Lin nói về cách nhóm Walrus giúp khách hàng chọn đúng máy bơm và những điều cần xem xét trước khi chọn máy Bơm công nghiệp .
Giám đốc bán hàng James Huang trên Đài Trung là trung tâm bán hàng và hậu mãi cho máy Bơm công nghiệp do Walrus sản xuất
Quả óc chó không chỉ cung cấp máy Bơm công nghiệp cho ngành Bơm công nghiệp máy móc. James Huang với một cái nhìn tổng quan về tất cả các ứng dụng
bạn cũng vậy, hai trong số các nhà sản xuất máy công cụ lớn nhất tại Đài Loan chia sẻ kinh nghiệm của họ với Các sản phẩm của Walrus
Phiên hỏi đáp cung cấp câu trả lời cho các câu hỏi phổ biến nhất và các câu hỏi sau bán hàng về máy Bơm chìm nói chung và Sê-ri TPRK_E.
Ngày 9 tháng 4 năm 2020
TPRK 1T
TPRK 3T
TPRK 5T
Trò chuyện hoặc liên hệ với Walrus
Nói chuyện ngay trên FB tin nhắn
Gửi tin nhắn đến Simon Yen, Int. Đại diện bán hàng.. Anh ấy sẽ quay lại với bạn trong thời gian ngắn!
Liên kết
Tìm hiểu hơn về WALRUS đây.
Tìm hiểu hơn về Sê-ri TPRK đây.
Cause 1: Check if electrical power source, fuse or circuit breaker failed.
Cause 2: Check if pump is locked up by sand, rust or any foreign objects.
Cause 3: Check if the motor is defective due to overload or other causes.
Cause 1: If it is a three phase motor, please check if the direction of rotation is correct.
Cause 2: Check if the inlet source is sufficient, the suction lift is not too great and the temperature is within the normal range.
Cause 3: Check if there is any leakage in suction pipe,check valve works normal and mechanical seal is not defective etc.
Cause 1: Motor overheat due to excessive suction lift or too high liquid temperature.
Cause 2: Control circuit has cut out (pressure switch or level controller).
Cause 1: No electricity supply.
Cause 2: Fuses are blown.
Cause 3: Motor overheating relay tripped.
Cause 4: Defective magnetic contactors.
Cause 5: Control circuit malfunction.
Cause 1: Fuses blown or breakers tripped.
Cause 2: Overheating relay tripped.
Cause 3: Control circuit malfunction.
Cause 4: Pump locked up by foreign objects.
Cause: Pump impeller blocked by impurities.
Cause 1: Suction filter blocked by impurities.
Cause 2: Incorrect rotating direction.
Cause 1: Supply failure. Remedy:Connect the electricity supply.
Cause 2: Fuses are blown. Remedy:Replace fuses.
Cause 3: Motor starter overload has tripped out. Remedy:Reactivate the motor protection.
Cause 4: Thermal protection has tripped out. Remedy:Reactivate the thermal protection.
Cause 5: Main contacts in motor starter are not making contact or the coil is faulty. Remedy: Replace contacts or magnetic coil.
Cause 6: Control circuit is defective. Remedy:Repair the control circuit.
Cause 7: Motor is defective. Remedy:Replace the motor.
Cause 1: One fuse/automatic circuit breaker is blown. Remedy:Cut in the fuse.
Cause 2: Contacts in motor starter overload are faulty. Remedy:Replace motor starter contacts.
Cause 3: Cable connection is loose or faulty. Remedy:Fasten or replace the cable connection.
Cause 4: Motor winding is defective. Remedy:Replace the motor.
Cause 5: Pump mechanically blocked. Remedy:Remove the mechanical blocking of the pump.
Cause 6: Overload setting is too low. Remedy:Set the motor starter correctly.
Cause 1: Overload setting is too low. Remedy:Set the motor starter correctly.
Cause 2: Low voltage at peak times. Remedy:Check the electricity supply.
Cause 1: Supply failure. Remedy:Connect the electricity supply.
Cause 2: Fuses are blown. Remedy:Replace fuses.
Cause 3: Thermal protection has tripped out. Remedy:Reactivate the thermal protection.
Cause 4: Main contacts in motor starter are not making contact or the coil is faulty. Remedy: Replace contacts or magnetic coil.
Cause 1: Pump strainer partly blocked by impurities Remedy:Clean the strainer.
Cause 2: Liquid level in tank too low. Remedy:Increase the liquid level.
Cause 3: Pump draws in air. Remedy:Check the suction conditions.
Cause:Shaft seal is defective. Remedy:Replace the shaft seal.
Cause 1: Cavitation occurs in the pump. Remedy:Check the suction conditions.
Cause 2: Pump does not rotate freely (frictional resistance) because of incorrect pump shaft position. Remedy:Adjust the pump shaft.
Jan 10, 2020
Apr 09, 2020
Apr 08, 2020