Pumped Liquids

Thin, clean and non-explosive liquids without solid particles or fibres.

The pumps are able to pump liquids such as demineralised water, softened water, sea water, cleaning solutions and light oils.

When pumping liquids with a density and/or viscosity higher than that of water, motors with correspondingly higher outputs must be used, if required.

Whether a pump is suitable for a particular liquid depends on a number of factors of which the most important are chloride content, pH value, temperature and content of solvents, oils, etc.

Pump Construction

Horizontal, multistage centrifugal pump of the non selfpriming type with extended pump/motor shaft and fitted with a mechanical shaft seal.

Compact pump unit with small physical dimensions, axial suction port and radial discharge port.

Operating Condition

• Ambient temperature: Max. +40°C
• Liquid temperature: +0°C ~ +90°C
• Operating pressure: Max. 10 kg/cm²
• Inlet Pressure: Max. 6 kg/cm²

Motor

• Protection class: IP54
• Insulation class: F.
• Frequency range: 50 / 60 Hz
• Nominal speed: 2900 / 3500 rpm
• Standard voltages:
  • 3Ø 200-240 / 380-440V 50Hz
  • 3Ø 200-255 / 380-480V 60Hz

Model code